How do you polish wooden idols? It is a question that has been asked by many people who own or want to own a wooden idol. While the answer may seem simple, there are actually several ways to go about polishing your wooden idol. The most common method is to use sandpaper, but there are other ways as well.
The first step in polishing your wooden idol is to figure out what kind of finish you want on the idol. Do you want it to be shiny? Or do you want it to have a more natural look? This will help determine what kind of sandpaper you need to use. If you want a shiny finish, then you will need to use finer grit sandpaper. If you want a more natural look, then coarser grit sandpaper will work just fine.
Once you have decided on the type of finish you want, the next step is to start sanding your idol. You will want to start with a coarse grit sandpaper and work your way up to a finer grit until the desired results are achieved. When using sandpaper, be sure not to press too hard as this can damage the wood; instead, let the weight of the paper do most of the work for you.
Wipe down the statue with a dry washcloth. This will remove the dust
Afterward, apply a small amount of olive oil or beeswax to a clean cloth. Gently rub this over the wood in a circular motion until you’ve covered the entire surface. Allow the oil or wax to soak in for at least 30 minutes before buffing it out with a soft, dry cloth.
Fill a bucket with water and add a wood safe soap to the water
Next, take a clean cloth and wet it in the soapy water. Rub the wet cloth over the wood surface in a circular motion. Be sure to go with the grain of the wood. After you’ve gone over the entire surface, rinse off the soap with clean water.: Next, dry off the wood with a clean towel. Once it’s dry, apply a small amount of mineral oil to a soft cloth and rub it into the wood in a circular motion. Wipe away any excess oil with a clean towel.: Finally, buff your newly polished wooden idol with a soft, dry cloth until it shines!
Dip the washcloth into the soapy water and wipe down the wooden statue with the wet and soapy washcloth
Wipe down the entire surface of the statue, making sure to get into all of the crevices and hard-to-reach areas. Once you’ve thoroughly cleaned the statue, rinse it off with clean water to remove any soap residue.
To polish your wooden statue, start by using a soft, dry cloth to dust it off. If there are any stubborn dirt or grime spots, you can use a slightly dampened cloth to gently wipe them away. Once your statue is dust-free, apply a small amount of furniture polish or beeswax to another soft cloth and rub it into the wood in a circular motion. Buff away any excess polish with a clean, dry cloth until your statue has a nice shine.
Wet the second washcloth with plain water
Soak a clean, soft cloth in water. Wring it out so that it’s damp, but not dripping wet. Rub the cloth over the entire surface of the wood to remove any dirt, dust or grime.: Use a mild soap if your wood is very dirty. Wet a third washcloth with soapy water, wring it out and rub it over the surface of the wood. Rinse the soap off with the damp cloth.: Dry the wood thoroughly with a clean towel.Waxing is optional, but will give your wood an extra layer of protection against dirt and scratches. Apply a thin layer of beeswax or furniture wax to the surface of the wood with a clean cloth. Buff it in until you can’t see any more wax on the surface.: Polish wooden idols by wetting a second washcloth with plain water and rubbing it over their surfaces to remove any dirt or grime before optionally waxing them for extra protection against dirt and scratches.
Dry the statue with a dry towel
Wipe the statue down with a dry towel to remove any excess moisture.
Next, apply a small amount of wood polish to a soft cloth and rub it into the wood in a circular motion.
Finally, buff the statue with a clean, dry cloth to bring out its shine.