Bark is an important part of a tree, not only for protection against pests and disease, but also for the tree’s overall health. When a tree is cut down, the bark is removed along with the rest of the tree. This can be done by hand or with a machine, but either way, it’s important to remove as much of the bark as possible.
Once the bark is removed, it’s time to apply a fresh coat. This can be done with a brush or sprayer, and there are a variety of products on the market specifically designed for this purpose. The most important thing to remember when applying bark protector is to follow the manufacturer’s instructions carefully.
Bark protector will help keep your log in good condition and prevent insects and rot from setting in. It’s important to reapply Bark Protector every few years, or as needed, in order to maintain its effectiveness.
Cut the stock in the winter when the sap is not flowing. Bacteria or mold growing under the bark will reduce its bond to the wood
If you’re cutting your own lumber for log furniture, it’s important to cut the stock in the winter when the sap is not flowing. Bacteria or mold growing under the bark will reduce its bond to the wood.
To help keep bark on a cut log, make sure that all cuts are clean and straight. A chainsaw with a sharp blade will give you the best results. If you’re using a hand saw, be extra careful not to nick or damage the bark.
Once your logs are cut, it’s helpful to let them sit for a few days before removing the bark. This allows any moisture that may have seeped into cuts to evaporate, which can help prevent bacterial growth.
To remove bark from logs, start at one end and work your way down with a draw knife or other sharp tool. Be sure to go slowly and carefully so you don’t damage the underlying wood. If any sections of bark are particularly stubborn, you can use a chisel and mallet to gently loosen them before peeling them away.
Store your harvested pieces in a cool, dry place. Or, if you can put it in a kiln right away that is even better
Assuming you want tips on how to keep bark on a cut log:
Store your harvested pieces in a cool, dry place. Or, if you can put it in a kiln right away that is even better. If the wood is still wet, set it on some old newspapers or cardboard to prevent staining your floor or furniture. You can also seal the end of the log with shellac or paint to prevent moisture from seeping in and causing the bark to loosen.